Yamaha '90s 700-900 Series Compatible Stand Bushing (Height Sleeve), 3/4" or 1" Tube, Drum Part Replacement

A replacement for a worn, cracked or missing plastic stand bushing (the "height sleeve") on '90s Yamaha-compatible stands. It sits in the top of the outer tube, and the wing screw presses on its flex flap to lock the height. Modeled from original Yamaha sleeves and fit-tested on our own stands.

• Sizes: 3/4" (19 mm) or 1" (25.4 mm). Pick the size of the inner tube that slides through the sleeve.
• Fits: '90s-era Yamaha stands in the 700, 800 and 900 series (for example CS730, CS830, CS930, SS930, HS930, WS940) that use this flanged, split-sleeve bushing with a nub and a curved metal shoe. Today's CS750, CS850 and CS965 use a different sleeve. Please compare your old sleeve with the dimensions in the diagram before ordering.
• One of each: CS730, CS735, CS830 and CS835 stands use one of each size: 3/4" at the top joint, 1" at the base.
• 3/4": 19.3 mm bore, 26 mm outside, 34 mm flange, 30 mm tall
• 1": 25.8 mm bore, 29.6 mm outside, 37.3 mm flange, 30 mm tall
• Material: 3D-printed black PETG
• Metal shoe not included: reuse the curved metal shoe from your old sleeve. It sits between the wing screw and the flap.

Fitting tip: the small nub on the outside of the sleeve has to sit in the matching hole in the stand's outer tube. If the inner tube feels tight, the nub isn't seated yet: turn the sleeve until the nub drops into the hole.

Note: Do not over-tighten.

Multi-buy: Buy 2, save 5%. Buy 3 or more, save 10%. Mix and match any of our parts and plates (lug spacers and inserts have their own pack prices); the discount comes off automatically in the cart.

Like all 3D-printed parts, minor surface texture and small variations in finish are normal.